Journal article
Improvements and Evaluation of an In-Field Bin Filler for Apple Bruising and Distribution
Transactions of the ASABE, Vol.62(2), pp.271-280
01/01/2019
Metrics
5 Record Views
UN Sustainable Development Goals (SDGs)
This output has contributed to the advancement of the following goals:
Source: InCites
Abstract
Automatic bin filling is needed for apple harvest and in-field sorting. A commercially viable bin filler for in-field use should be simple, compact, low in cost, and be able to distribute apples evenly in the bin without causing bruising damage. An innovative bin filling technology was developed for incorporation with the new apple harvest and in-field sorting machine recently developed by our group. Field tests of the first version of the bin filler in the 2016 harvest season showed relatively high bruising rates and uneven fruit distributions. Subsequently, a second version of the bin filler was developed with several major improvements. A new pair of foam rollers for better control of apples exiting the sorting system and avoiding fruit collisions during free falling was added below the sorter. An improved pinwheel with nine longer soft pads, instead of four short pads as in the original version, was installed for better fruit distribution. Foam guides, attached to the long pads, reduced the rolling speed of fruit from the pads into the bin. Field tests conducted in the 2017 harvest season showed that the second, improved version of the bin filler achieved superior performance in reducing bruise damage, with 99% of ‘Gala‘ apples and 98% ‘Blondee‘ of apples graded Extra Fancy. Furthermore, a depth imaging method, using a Kinect-v2 camera, was proposed to quantitatively compare the performance of the two bin fillers for distribution of fruit in the bin under uniform and non-uniform feeding conditions. Analysis of the fruit height data showed that the apple distributions were not significantly affected by feeding method for both bin fillers. Overall, the second version of the bin filler resulted in better distributions of apples in the bin, compared to the first version, and uneven distributions mainly occurred in the corners of the bin, which could not be reached by the bin filler‘s pinwheel. The improved bin filler meets the requirements for apple harvest and in-field sorting, and it has potential for use with other harvest platforms.
Details
- Title
- Improvements and Evaluation of an In-Field Bin Filler for Apple Bruising and Distribution
- Creators
- Zhao ZhangAnand Kumar PothulaRenfu Lu
- Publication Details
- Transactions of the ASABE, Vol.62(2), pp.271-280
- Publisher
- American Society of Agricultural and Biological Engineers
- Identifiers
- 991013100913402368
- Academic Unit
- Faculty of Science and Engineering
- Language
- English
- Resource Type
- Journal article