Conference proceeding
Experimental Testing of GFRP-Reinforced Concrete Beams with Mid-Span Lap Splices Utilizing Straight- and Hooked-End Bars
8th International Conference on Advanced Composite Materials in Bridges and Structures, pp.103-110
Lecture Notes in Civil Engineering
14/09/2022
Metrics
57 Record Views
Abstract
Four large-scale concrete beams reinforced with glass fiber-reinforced polymers (GFRP) bars were experimentally tested to investigate the bond strength between the reinforcing bars and concrete. Two beam specimens were designed using 550 mm long lap splices that utilized straight-end bars, while the other two specimens were designed with hooked-end bar lap splices. Beams were designed in accordance with CSA-S806-12 (CSA 2012) design standard and were tested under four-point flexure bending until failure. Test results show that the two beams with straight-end bar lap splices achieved the theoretical design moment resistance, and both specimens failed due to slippage of the bars. On the other hand, the experimental results of the two beams designed with hooked-end bar lap splices failed due to concrete crushing within the hooks at about 50% greater moment capacity than their theoretical design value. Outcomes of this experimental study on large-scale GFRP-reinforced concrete beams show that hooked-end bars would provide excellent bar anchorage compared to that provided in case of straight-end bars.
Details
- Title
- Experimental Testing of GFRP-Reinforced Concrete Beams with Mid-Span Lap Splices Utilizing Straight- and Hooked-End Bars
- Creators
- Omar NourOsama SalemAhmed Mostafa
- Publication Details
- 8th International Conference on Advanced Composite Materials in Bridges and Structures, pp.103-110
- Series
- Lecture Notes in Civil Engineering
- Publisher
- Springer International Publishing; Cham
- Identifiers
- 991013051227102368
- Copyright
- © 2023 Canadian Society for Civil Engineering
- Academic Unit
- Faculty of Science and Engineering
- Language
- English
- Resource Type
- Conference proceeding